Martin-audio Blackline F215+ 黑线+ 系列音箱


产品介绍

The Blackline F215+ is a two-way passive, trapezoidal enclosure with dual 15” (380mm)/3” (75mm) voice coil low frequency drivers and a 1.4” (35mm) exit titanium diaphragm compression driver, mounted on a proprietary, rotatable, 80° x 50° constant directivity horn.

Below 250Hz, both LF drivers operate together to produce low frequencies, whilst above 250Hz, only the upper LF driver is used to reproduce the midrange up to the crossover point. This technique avoids the uneven response which would occur if both drivers were allowed to operate together over the midband.

Each of the two new LF drivers features a tough, water resistant cone and a lightweight, high BL, neodymium motor system with inside/outside coil windings for improved heat transfer. An aluminium demodulating ring improves the midrange performance at high levels and increased excursion is available via a triple roll surround and deep motor structure.

The F215+ can be used with or without a controller. Use of the M3+ or DX1.5 will enhance the low frequency performance of the system and provide high quality limiters to protect the F215+ from being overdriven

FEATURES

Very high SPL from a full range passive enclosure

Extended low frequency performance from dual

15” (380mm) low distortion drivers

User rotatable 80°x 50° horn

1.4” (35mm) exit titanium dome compression driver

Five year limited warranty

TECHNICAL SPECIFICATIONS

TYPE

Two-way passive reflex with dual bass drivers

FREQUENCY RESPONSE(5)

45Hz-18kHz±3dB

-10dB@40Hz

DRIVERS

2×15"(380mm)/3"(75mm)voice coil,neodymium magnet LF driver

1.4"(35mm) exit HF compression driver

RATED POWER(2)

800W AES,3200W peak

RECOMMENDED AMPLIFIER

MA5.2K

SENSITIVITY(6)

101dB

MAXIMUM SPL(9)

130dB continuous,136dB peak

NOMINAL IMPEDANCE

4ohms

DISPERSION(-6dB)

80°horizontal,50°vertical

CROSSOVER

1.4kHz passive

ENCLOSURE

180 litre,multi-laminate birch ply

FINISH

Textured black paint

PROTECTIVE GRILLE

Black perforated steel

CONNECTORS

2×Neutrik NL4

PIN CONNECTIONS

FR+,-:1+,1-,Link thro':2+,2-

FITTINGS

12×M10 threaded inserts

4×4"(100mm)castors

3×pocket handles

DIMENSIONS

(W)560mm×(H)1066mm×(D)496mm(627mm)

(W)22ins×(H)42ins×(D)19.5ins(24.7)

WEIGHT

59kg(130lbs)

产品价格

  • 市场价:请电话咨询
    批发价:请电话咨询
    会员价:请电话咨询